05-11-2014, 09:28 AM
|
 |
CC Member
|
|
|
Join Date: Apr 2004
Posts: 1,033
|
|
Not Ranked
Quote:
Originally Posted by Shelboss
Hi Dan, do you think you could take a few measurements for the demister locations? Since I don't have a windshield yet, distance from the cockpit and distance apart would be very helpful!
|
On my old black car, visually and tape measure wise (measuring an assembled car is not micrometer accurate for various reasons) the inboard holes appeared to be in line (as best I could tell because I was having to look through the curved glass) with the holes for the bracket in the windshield frame. The outboard holes are not in that same line as the deflectors angled to match the curve of the windshield. The tape measure estimate of the center lines of the two inboard holes was 12¼ inches parallel (the cowl is a curve, the tape measure was more or less straight horizontal) to the ground.
__________________
Dan Case
1964 Cobra owner since 1983, Cobra crazy since I saw my first one in the mid 1960s in Huntsville, AL.
|
2Likes
Hybrid Mode
