Identifying dash warning lights 289

[Armrer]

Originally Posted by ALF

Yes and I'm still hoping Nick or John can help.

The warning light is mainly done out of 4 parts.

• bulb holder
• retainer
• front cover
• red lens

The point is now finding some one able to reproduce a blank front cover.

I just commissioned the proper stamping die to replicate the plain alternator light bezels (without lettering) as found in 289 Cobras. They will come as an assembly (chromed outer bezel, lens, inner bezel support and spring). You will have to supply your own bulb holder. These new bezels will interface with OE Cobra bulb holders only, so if you don't own one, you'll have to track it down on Ebay. Not an impossible task.

[ALF]

Originally Posted by Armrer

I just commissioned the proper stamping die to replicate the plain alternator light bezels (without lettering) as found in 289 Cobras. They will come as an assembly (chromed outer bezel, lens, inner bezel support and spring). You will have to supply your own bulb holder. These new bezels will interface with OE Cobra bulb holders only, so if you don't own one, you'll have to track it down on Ebay. Not an impossible task.

GREAT NEWS!!
As I own 2 of the warning lights (as on the picture I added) this should not be an issue for me.
Could you please contact me as soon you've them ready to sale.
MANY THANKS

[Armrer]

Originally Posted by ALF

GREAT NEWS!!
As I own 2 of the warning lights (as on the picture I added) this should not be an issue for me.
Could you please contact me as soon you've them ready to sale.
MANY THANKS

ALF- I'll post progress here as they roll in, and you can PM me when they are close. You will like : D

Best-

Jeff