
08-17-2021, 03:11 PM
|
|
CC Member
|
|
|
Join Date: Nov 2015
Posts: 172
|
|
Not Ranked
I used 3/8" o.d. stainless tube that I probably ordered from McMaster-Carr. Aluminum tubing of the same diameter would be fine. The dipstick part # is shown in the photo.
https://www.cjponyparts.com/scott-dr...waAiteEALw_wcB
Last edited by HTM101; 08-17-2021 at 03:16 PM..
|