Wiper arm spacing

[Sal Gerace]

Can anyone tell me the exact distance between the wiper arms measured from the center of one shaft to the center of the other. I would like to also hear from an owner with an original car to see where they were spaced if possible!

[double ugly]

I could measure my Hi Tech if you want. Let me know.
John

[Sal Gerace]

It would not hurt to hear from a few differant company's to see how close they were set up to an original also, Thanks!

[James Garcia]

I have just purchased a completed Cobra replica that has no windshield wipers. In Texas I have to have them in order to get the title transferred and the car inspected. I purchased the Lucas wiper assembly and am unsure where to place the wiper shafts. Does anyone have any ideas or is everyone of these different? Thanks in advance.
James

[James Garcia]

Good evening to all and thank you so much for the helpful information you all so unselfisly provide to all those who share the love for a beautiful automobile.
I have just purchased a completed Cobra replica that has no windshield wipers. In Texas I have to have them in order to get the title transferred and the car inspected. I purchased the Lucas wiper assembly and am unsure where to place the wiper shafts. Does anyone have any ideas or is every one of these different? Thanks in advance.
James

[Sal Gerace]

Jim another member told me that originals were about 19 5/8" spaced apart.

[Jim Maxwell]

CSX 3288 has the center of post to center of post as 20 inches. Each post is 16 3/4 inches from the outer edge of the uprights for the windshield. The back edge of the wiper ferrell (the chrome base) is 1 1/8 inches in front of the lower edge of the windshield frame. The rubber seal almost touches the ferrell.