289 Motor Mounts

Fox · #1 (**permalink**) 11-02-2008, 06:47 AM

Looking at the mount I have may be too narrow for a upper and lower bolt...

Don't some of the 427 guys cross bolt their motor mounts due to excessive vibration... it can be done safely, right?

KarlCSX2498 · #2 (**permalink**) 11-02-2008, 07:15 AM

Hello, The 289 mounts are not like the hi po mustang mounts. The mounts have the C shaped piece that bolts to the block and under that it has a rectangle shaped piece of rubber that is approx. 2.5" thick and on the bottom of that is another piece of steel that has the two bolt hole to secure to the chassis motor mounts.

I will try to snap a photo later today and post here.

Later, karl

mk2gt40 · #3 (**permalink**) 11-02-2008, 08:05 AM

Nick,
Have sent you pics and what you require. Will dbl check later.Regards
Ross