BBS Wheels 18"X 9's & 11's

[Morris]

I'm sure the purist will not appreciate this.... but it took me a year to get BBS to make some center sections for the Cobra 6 Pin hubs.... only come in 18" and 19"

These also have a great offset to accomodate large brakes that over hang the caliper.....

Let me know if you want any of these wheels....

List is around $5900 a set and we can get it discounted down to about $5000 a set....

Check my gallery for photo's of the wheels...


Morris

[The Dreamer]

Are the rear wheels 18 or 19in? I would assume you have the backspacing for the Kirkham. I know you have made quite a bit of mods (that's an under statement) to your car, did you change the track? I applaud you for blazing the trail.

[marcocsx3121]

I wish that I had your clout with BBS. I've wanted a set of these beauties for my 'Vette for years, but in spite of the fact that I live about twenty minutes away from the BBS North America HQ, my pleas have been ignored.

As for these wheels on Cobras, I'm with the purists.

[mr bruce]

What about Joengblood, or Real wheels?

[Morris]

Dreamer

The centers sections will work for a 18" or 19" wheel..... depending on the type of outers you use..... that's the part I like....

And you are right ...the back spacing is for the Kirkham hubs and cars ....it's 5.5" on the 11" and 4" on the 9" wheels.....

Marco ....

Win 3 National Championships with their wheels and you get to know the folks and they will help....

bruce...

Why go with 2nds when you can go with the best....

[marcocsx3121]

I'll get to work on those national championships ASAP.

[mr bruce]

lots of the Trans-Am and sports car teams use them wheels too. Don't know if the pin drive/ offsets will work for you Marco. Contact them ,sometimes you might get a deal.