New Build

[Brooklyn-427]

Glorious

[cobrakiwi]

Originally Posted by Brooklyn-427

Glorious

Thank you,
return PM sent.

[cobrakiwi]

Back to the build,
we are starting to lay out the body on the frame.
We are starting with the rear section first, a little trimming here and there along with some hammer swings we should be in good shape.
Covering all the frame work with the shinny parts makes it look like it has some potential.

[picah]

Absolutely unbelievable !! Amazing work !!
Can you please post a pic of the underside of the trunk/hood? Interested in the details of the attachment of the shiny parts to the perimeter tubing.
You have amazing skills
Best
Ron

[cobrakiwi]

Thanks Ron
Have a look at my other 427 build I am working on, I believe it has the details your looking for.

427 Build by Cobrakiwi

Originally Posted by picah

Absolutely unbelievable !! Amazing work !!
Can you please post a pic of the underside of the trunk/hood? Interested in the details of the attachment of the shiny parts to the perimeter tubing.
You have amazing skills
Best
Ron

[HTM101]

When I visit cobrakiwi's shop there are many examples of his workmanship to admire. The pieces I'm most drawn to are the frames. I look at them, and then glance at unused, unbent, and not yet welded pieces of round and square steel stock. I look at the frames again and am in awe.

David

[cobrakiwi]

Originally Posted by HTM101

When I visit cobrakiwi's shop there are many examples of his workmanship to admire. The pieces I'm most drawn to are the frames. I look at them, and then glance at unused, unbent, and not yet welded pieces of round and square steel stock. I look at the frames again and am in awe.

David

Thanks David,
I also enjoy your visits, I have very much enjoyed working on your HiTech projects with you.

Next up on this build, we are test fitting the front clip, this build is really starting to come to life.