427 Build by Cobrakiwi

1985 CCX · #1 (**permalink**) 11-10-2015, 07:37 PM

Work of art!
You do great work and belong in the scratch builders hall of fame.

cobrakiwi · #2 (**permalink**) 11-15-2015, 04:36 PM

Thanks for the complement Jeff,
I really do appreciate all the positive comments.

Quote:

Originally Posted by 1985 CCX

Work of art!
You do great work and belong in the scratch builders hall of fame.

cobrakiwi · #3 (**permalink**) 11-15-2015, 04:47 PM

I was able to get a few hours in today on the build, I made a few more panels for the trunk, I need more clecos to finish the trunk up, (on order) then I made the dash panel up.

cobrakiwi · #4 (**permalink**) 11-21-2015, 04:40 PM

Made up a few more panels over the last couple of days, finished the lower rear bulkhead panels.
Installed the radiator so I could start on the panels in the nose of the car.

cobrakiwi · #5 (**permalink**) 11-21-2015, 05:00 PM

After making the panels around the radiator, I was able to finish up the nose panels, then move onto the panels for the oil cooler shroud.
This is about it for alloy work forward of the rad.

Dominik · #6 (**permalink**) 11-28-2015, 10:35 PM

Nice spare wheel insert (trunk floor)!

I had my laser cut people digitise one of my fibre parts years ago and it came out quite well, including the rivet holes and bend/fold lines.

Unfortunately I only have the SolidWorks file left (the CAD is lost) and can't make the part anymore..

I tried to upload, but the file format is not supported. Anybody who wants it, drop me a PM. I hope somebody can convert it back to a CAD. It's not 100% refined yet. If I remeber correctly I need to add some clearance along the bends.

cobrakiwi · #7 (**permalink**) 12-10-2015, 02:45 PM

Dominik,Thanks for the positive comments, you should start a thread and show your builds. Sounds like you have built some nice stuff.

I got to make a couple more panels today.