Fasterpatricks Custom Cobra

[fasterpatrick]

Man this is going to take a while. Current estamtes tell me that I should be finished reloading my pics next sunday(9 days from now). Man is there anyway I could bribe someone to wave the ten pic rule till I get my gallery reloaded.

Patrick

[fasterpatrick]

Well thank all of you for your input. Here is what I came up with. I have eight points that will be glassed into the body for hidden mounts,plus the three points around the door sill (anti intrusion pins through the body) and the bumper mounts.




Now I can mix up some goo and fix the pads to the body and continue with the panel construction portion of this build; Patrick

[fasterpatrick]

Most of you,(Okay some of you) know that I'm building my cobra the hard way, from scratch. Well here are some pics of the rear wheel well panels I've been working on. Working with glass is not fun, but forming sheet metal into these shapes would require way to much work.




Now I was hoping that I could get a good pic of what it looks like from the front wheel well toward the front and toward the exhaust, with the body mounted. I need to start plotting the panels for the front wheel wells and could use some ideas.
Patrick

[map]

Originally Posted by fasterpatrick

Well thank all of you for your input. Here is what I came up with. I have eight points that will be glassed into the body for hidden mounts,plus the three points around the door sill (anti intrusion pins through the body) and the bumper mounts.




Now I can mix up some goo and fix the pads to the body and continue with the panel construction portion of this build; Patrick

I think you'll find on the first hot sunny day this car sits out and the body gets hot you'll see the round imprints where you laminated the support disc. On the lower sides i don't think it's a problem but on top it's gonna sag..


Mike