Steering wheel center

alfy65 · #1 (**permalink**) 08-31-2007, 12:43 PM

Guys,
What measurement do you have for center of dash to center of steering wheel and same from top of floorboard to center of wheel.Also face of steering wheel to rear cockpit bulkhead.Cobra restorer plan looks a little off...
Thanks

KarlCSX2498 · #2 (**permalink**) 08-31-2007, 01:58 PM

Hello,
#1 center of dash to center of steering wheel: 13.5"

#2 floor to center of steering wheel: 21"

#3 center of steering wheel to rear bulkhead: 29.5"

these are from CSX2498. I hope this helps. regards, Karl

alfy65 · #3 (**permalink**) 08-31-2007, 02:53 PM

Karl,
Thanks that certainly helps...nice work by the way.
Al

mickmate · #4 (**permalink**) 09-17-2007, 07:04 PM

Hi Alfy, I also question the CR 14 3/8" dimension. If you have a look in my gallery there is a dimensioned drawing of the cockpit that has a few useful 289 numbers.

alfy65 · #5 (**permalink**) 09-23-2007, 12:56 PM

Hey Mick,
I went with 14" center from cowl center to steering center, felt right.
Al