Shell Valley Guys With 302's....

blykins · #1 (**permalink**) 06-21-2004, 05:06 PM

Hey Guys.....Can one of you do me a quick favor?

When you look down at the header....there is a straight part that comes straight out.....then it angles down toward the sidepipe....Can one of you take a quick measurement for me? The easiest way I can describe it is to stand by the front driver's side fender....look down at the header....and measure how long the straight section of the header is. If you can, measure the second pipe back from the front....from the header flange to about the middle of the bend on the pipe.

I would be very grateful for your help.....

blykins · #2 (**permalink**) 06-22-2004, 09:48 AM

KillerBox · #3 (**permalink**) 06-26-2004, 02:38 PM

Blykins:

I am not sure what you want measured but, I have bought a used Shell Valley with a 302. Write me at KillerBox at AOL dot Com and I will try to help you.

Killer