Wind wings installation

[gduncan]

I was missing some wind wing hardware and installation instructions when I got the car. I received new hardware but have a question. Which bolts do I use to attach the wind wings to the windshield frame? Every bolt I've tried (that came with new hardware) are not long enough to go through the bottom mount and into the windshield frame. I included a picture of the wind wing hardware I just received. Thanks for any help...

[pgermond]

Go down to the hardware store and buy a couple stainless screws the right length. Just be careful that you don't screw them into the windshield frame to far or you will crack the windshield

[monster7]

i would say the small countersunk screws in the middle of your picture, but without washers, they do not make any sense to me as the hole on the hinge is also countersunk

[gduncan]

Thank you...

[FWB]

the ones with the fiber washers are to mount the wings to the hinge, but it seems the ones by the hinge you could use also, i don't see where the ones in the middle will work
at all.
i think Phil's suggestion makes the best sense