|
Have it, wouldn't do without it. It's not the total weight of the car, it's the weight over the front wheels. A big block will obviously take more effort. Underway isn't an issue, trying to park and manuever is. Get to a local car show and ask one of those exceptional individuals without P/S if they'd mind you parking their car!!
Again it's up to you, if your going on the road course circuit, I wouldn't otherwise you'll thank yourself for the P/S. |
I have owned two miatas. My cobra is lighter than they were. i autocross. i took off the power steering pump on the miata for a while but in the end decided putting the pump back on was worth the weight.
I plan to autocross the cobra too and am considering ps on it....anybody used the Miata steering setup on a cobra yet? |
I know that going from a 15" steering wheel to a 16" steering wheel would
technically reduce the steering effort by some amount. For those who have tried both wheel sizes, could you please tell me what the noticeable steering effort reduction is with the 16" wheel. I realize that the larger diameter wheel could, in some cases, make ingress/egress more difficult or maybe put the pinch on the seating position of + sized drivers! |
|
There ya go Tom!!
|
Quote:
that is a lovely car! I certainly don't need the superchargers though!') |
You guys do know this thread was 13 years old when you resurrected it, right?
Ed |
no ...my need is current in any case.
|
Quote:
Try starting your own thread and asking for help. Ed |
Quote:
1/2" ÷ (15"÷2) = 6.7% reduction in steering effort. Perhaps noticeable, but hardly significant. |
I researched options. I looked at the electric power steering unit that is in my Lotus seven replica. It is based on a small chevy (cruz?) and has some good features including an adjustment for assist. It has zero feel though and it takes up a space the size of a medium sized muskmellon. I don't have room for it.
My manual rack is a flaming river and is mustang 2 based. So I have ordered a t-bird based power rack which I believe will bolt in. The body of the rack is aluminum. The rack has 2.5 turns lock to lock. I would like less. A saginaw pump will bolt onto my Chevy block and hoses to match the odd ends can be bought. I'll wait to order them after the large stuff is installed. I also ordered an aluminum ps pump. Anybody need a manual rack with 2.5 turns lock to lock with 3,000 miles on it? I'll sell it reasonably. |
Quote:
On my car the wheel is very close to the dash which overhangs the gauges. A larger wheel would not fit. I have fitted a smaller wheel to go with my power steering and help me out on the autocross course. |
Quote:
I agree. I had the 15" steering wheel for about 20 years, and switched to the 16" wheel about 4 years ago. The additional 1/2" increase from center of hub to rim, is negligible during ingress/egress. There's probably a small gain in reduced steering effort. David |
My Cobra has the miata p/s rack with Electro/Hydraulic pump from a 2000 MR2 Spyder.
It’s self contained and you can hook it into your speed sensor for variable pump output. Albeit works just fine without speed sensing. You can mount it anywhere keeping in mind you have to run a pressure and a return line. |
Quote:
|
Power Steering
Quote:
It is lightly boosted but essential to our autox competition. If you watch a video of Scott driving my car you will see very quick wheel corrections, sometimes as much as 25 steering degrees in his autox runs. |
Yes, and you have a 1:1 ratio, right? I guess that's the reason, too, for using it in other racing (outside autocross).
In Germany people use the unit from a OPEL Corsa-C (from 2001 to 2008?). It electric and can (obviously) be switched off. Intermediate shaft is what we call a Double-D fit... |
I got my t bird power rack installed and working now. It is fine. It is just a bit over two turns lock to lock. I had a time getting the hoses sorted but that is all solid now.
The only fly in the ointment is it does not return itself after a turn. It does a little but not enough and not quickly enough. I plan to dial in more caster in an effort to help this and to help striaght line stability. |
I just ran across this from Flaming River. I really like the idea of adjustability, especially making it speed sensitive. While there's not much room to install it, it does look like it would fit in many Cobras.
https://www.speednik.com/files/2019/...27-960x585.jpg Flaming River is now offering Microsteer universal Electric Power Assisted Steering system. It can be easily fitted to virtually any vehicle, without the need to change steering rack or fit a hydraulic system where manual steering currently exists. The unique Microsteer Tuning Box allows you to adjust the amount of assistance by using a rotary potentiometer or, if you prefer, you can make the system speed sensitive by connecting a wheel speed signal to the Tuning Box. A mode selection switch on the box allows you to choose your preferred method, manual or wheel speed. https://www.flamingriver.com/index.p...osteer/FR40200 |
Maybe. If you have a clunker big block, you might find it helpful. I don't come close to needing it with my 427 stroker.
Fred |
| All times are GMT -7. The time now is 06:29 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: