
08-19-2006, 10:41 PM
|
 |
CC Member
|
|
|
Join Date: May 2001
Location: California,
Ca
Cobra Make, Engine: NAF 289 Slabside Early Comp Car with 289 Webers and all the goodies. Cancelling the efforts of several Priuses
Posts: 6,592
|
|
Not Ranked
This may highlight the problem:
Quote:
|
I don't think it was an updated points model. There are two wires coming out of the dizzy...same colors as the MSD wires, with a compatible connector. Was billed as "MDS compatible
|
The Black/Orange wire from the distributor connects to the Violet wire on the 6' MSD harness, and the Black/Violet from the distributor connects to the Green wire of the MSD harness. It is very easy to believe the Black/Violet connects to the Violet but it is not correct. To verify the condition of the magnetic pickup, check the ohms rating while it is accesable.
http://www.msdignition.com/pdf/tech%...ic_trigger.pdf
__________________
Rick
As you slide down the Banister of Life, may the splinters never be pointing the wrong way
Last edited by Rick Parker; 08-19-2006 at 10:44 PM..
|