Hydraulic clutch is out again, help

MaSnaka · #1 (**permalink**) 07-21-2009, 02:32 PM

After re-reading my post I may have not made it clear that the hyd throw out bearing has been flawless. It's the master cylinder i have had all the trouble with. I know about other clutch systems, mainly I just want to know if anyone else has this same trouble with the Howe. Thanks for your replies.

John

Eljaro · #2 (**permalink**) 07-21-2009, 03:43 PM

I am using a Girling cast iron unit. No problem in 10 years.

Tommy · #3 (**permalink**) 07-21-2009, 06:17 PM

Quote:

Originally Posted by MaSnaka

After re-reading my post I may have not made it clear that the hyd throw out bearing has been flawless. It's the master cylinder i have had all the trouble with. I know about other clutch systems, mainly I just want to know if anyone else has this same trouble with the Howe. Thanks for your replies.

John

I have no experience with the Howe, but it wouldn't take too many times like yours for me to switch to a different supplier. I use CNC brand (http://www.cncbrakes.com/prodgroup.asp?grp=mc ) master cylinders for brakes and clutch with good success. I use the steel ones, but they make aluminum too.