Instructions for soft top installation

trashman22 · #1 (**permalink**) 10-01-2009, 01:51 PM

I cannot find my manual on installing the roof hardware. Can anybody help.

THANKS!

trashman22

computerworks · #2 (**permalink**) 10-01-2009, 01:57 PM

Please be more specific with your question.

Send a Private Message to me for validation and thread activation

thanks
ron
ClubCobra Moderator

computerworks · #3 (**permalink**) 10-02-2009, 10:13 AM

Mod Note....

Spoke with Trashman..

He is looking for help with a pattern for installing the studs that would hold down a soft top.

Can anyone help? He did not specify which body kit he has; maybe he can add that info to the thread

trashman22 · #4 (**permalink**) 10-02-2009, 10:46 AM

Not sure of the exact kit, it is for a 1966 shelby cobra??? Does that help, if not let me know and I'll try to dig up more info!

THANKS

Trashman

Silverback51 · #5 (**permalink**) 10-02-2009, 03:43 PM

Quote:

Originally Posted by trashman22

Not sure of the exact kit, it is for a 1966 shelby cobra??? Does that help, if not let me know and I'll try to dig up more info!

THANKS

Trashman

If you post pictures of the car, including the interior, there are people here that will be able to identify the kit manufacturer for you, and that will be the start.

*13* · #6 (**permalink**) 10-02-2009, 05:51 PM

Where are you located. Maybe someone will allow you to take measurements from their car.

strictlypersonl · #7 (**permalink**) 10-03-2009, 05:11 AM

Not all bodies have the same basic dimensions. Instead of locating the studs first, I would fit the bows and fabric first. Then use the location of the fabric flange determine the best place for the studs.

Soft top installation

Larry Spillman · #8 (**permalink**) 01-23-2010, 12:35 PM

Go to Cobra Restores site they sell everything and may have the sheet to cover instllatiuon of top snaps