04-30-2010, 01:24 PM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Jan 1999
Location: MARKSVILLE,LA.,,
Posts: 3,235
|
|
Not Ranked
Quote:
Originally Posted by lovehamr
David, it could turn out to be a very cool motor. What cam are ya'll planning on?
Steve
|
Right now it's got an old grind from Crane in it,hydraulic flat tappet, 484 lift, 272 duration, advertised as a 4x4/towing camshaft, very good bottom end torque, good from 1500 to 5000 rpms.
I'd like to see him go up to a cam in the low 500 lift, with no more than around 280 duration, but for now, plans are to re-use the same cam unless some $$$ gets freed up for another cam....
David
__________________
DAVID GAGNARD
|
Hybrid Mode
