Direction of water pump rotation

[rpatton3]

I want to add power steering and use a March serpentine setup for a Ford Power Steering pump on driver's side of a LHD car.

I think I need a four (not three) bolt pulley but I need to know if this will fit.

It is in Jeg's catalogue. What Ford pump should I get I this application fits
my engine?

I am not sure about water outlet on bottom of 427 Roush 427 SR. either.

Thanks,

[DAVID GAGNARD]

You can get small block Ford water pumps in either rotation.........early models turned clockwise, later models mostly with serpentine belts turned counterclockwise.....
You'll have to figure out your belt routing and see how it falls as to which pump to get.........

David

[Roger Bray]

I might have a pump that will work for you.
I bought my engine from Ford motorsports and the rotation of the pump was not right so I had to replace it.
The pump and backing plate are aluminum and I have new gaskets as well.
I will get the part number and send pics if you are interested.

Roger

[rpatton3]

Thanks!

Russell

[Cashburn]

Clockwise and your outlet is 1969+ style on drivers side.

[rpatton3]

Thanks.

Russell

[Mando]

I have a brand new Edelbrock reverse rotation polished water pump and housing if it suits your car and if your interested.

Regards.

[Roger Bray]

I also have a mustang 2 power steering rack if you need it