 
Main Menu
|
Nevada Classics
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
|
|
|
|
|
1 |
| 2 |
3 |
4 |
5 |
6 |
7 |
8 |
| 9 |
10 |
11 |
12 |
13 |
14 |
15 |
| 16 |
17 |
18 |
19 |
20 |
21 |
22 |
| 23 |
24 |
25 |
26 |
27 |
28 |
29 |
| 30 |
|
|
|
|
|
|
|
CC Advertisers
|
|
2Likes

11-05-2012, 03:14 PM
|
 |
CC Member
|
|
|
Join Date: Jan 2009
Location: Jonesboro,
AR
Cobra Make, Engine: Backdraft 874 solid red Roush 427 small block 515 hp
Posts: 572
|
|
Not Ranked
Airbag
Quote:
Originally Posted by RodKnock
Passenger side, right? I thought you installed the driver's side already. 
|
My airbags block views of rear safety camera.
Russell
__________________
There were no atheists in the foxholes.
|

11-05-2012, 04:09 PM
|
|
CC Member
|
|
|
Join Date: Aug 2007
Location: Carlsbad,
Ca
Cobra Make, Engine: SPF 2932 with 438 Lykins Motorsports engine. Previous owner of FFR 5452.
Posts: 2,616
|
|
Not Ranked
Just got more great news:
It appears that after rebuilding the engine and needing new pistons due to the cracks on two of them, I also need to replace some of the valves and all of the guides as a few of the valves and all of the guides are showing more than normal wear. The builder remarked that this engine looked like it had been run without oil. Not on my watch, but who knows what happened before it was delivered to me. There goes another $1200 just for head work.
At least I am going to have the most expensive Roush 427 SRTW ever rebuilt.
Can't take away my bragging rights!
Now, can anyone tell me how to grind off the ROUSH name from my air cleaner lid? I've already replaced the valve covers with generic Ford covers.
__________________
Jim
|

11-05-2012, 04:59 PM
|
 |
CC Member
|
|
|
Join Date: Sep 2011
Location: Loudon,
Tn
Cobra Make, Engine: Superformance#2352/Aluminum SO/490 c.i. 650 h.p. 605 tq.
Posts: 410
|
|
Not Ranked
Quote:
Originally Posted by jhv48
Just got more great news:
It appears that after rebuilding the engine and needing new pistons due to the cracks on two of them, I also need to replace some of the valves and all of the guides as a few of the valves and all of the guides are showing more than normal wear. The builder remarked that this engine looked like it had been run without oil. Not on my watch, but who knows what happened before it was delivered to me. There goes another $1200 just for head work.
At least I am going to have the most expensive Roush 427 SRTW ever rebuilt.
Can't take away my bragging rights!
Now, can anyone tell me how to grind off the ROUSH name from my air cleaner lid? I've already replaced the valve covers with generic Ford covers.
|
Damn Jim, what the hell happened to your engine!!!!!!!
|

11-05-2012, 06:46 PM
|
|
CC Member
|
|
|
Join Date: Aug 2007
Location: Carlsbad,
Ca
Cobra Make, Engine: SPF 2932 with 438 Lykins Motorsports engine. Previous owner of FFR 5452.
Posts: 2,616
|
|
Not Ranked
I wish I knew. When the heads were removed, there was no cross hatch visible in any of the cylinders. Should have been visible with 13,000 miles. There were even a couple of tiny gouges in two of the cylinder walls. A couple of lifters were showing abnormal wear. The heads are being rebuilt due to wear. Either this engine was just a POS from the get go or maybe it was accidentally run without oil before I received the car. Who knows?
All I know is the rebuild is costing more than the original cost of the engine. I guess I just expected more. Should have gone with another engine builder. Why Roush feels they have to build an engine with looser tolerances is beyond me. If I had read their exclusion paragraph, I would have passed and bought another engine.
Oh we'll, it's only time and money. But it's my f--kin time and money.
__________________
Jim
|

11-05-2012, 10:42 PM
|
|
CC Member
|
|
|
Join Date: Jun 2006
Location: Pattaya,
Posts: 479
|
|
Not Ranked
Gee
Can of worms
What happens if u are looking at buying a cobra that has a Roush motor. Sounds like a number of u haven't known the issues until u have stripped it down. I know this is the case with all engines but the chance of getting a dog sounds greater in a 427R Roush than other motors.
I would expect a street motor to be good for 20k or more surely.
Bruce
|

11-05-2012, 10:42 PM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Feb 2007
Cobra Make, Engine: KMP 539, a Ton of Aluminum
Posts: 9,592
|
|
Not Ranked
Quote:
Originally Posted by jhv48
Oh we'll, it's only time and money. But it's my f--kin time and money.
|
That's a good attitude.
Plus you live in a great town. Take a drive to the beach and watch all your worries melt away.
|

11-06-2012, 06:02 AM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Jan 1999
Location: MARKSVILLE,LA.,,
Posts: 3,235
|
|
Not Ranked
Quote:
Originally Posted by jhv48
I wish I knew. When the heads were removed, there was no cross hatch visible in any of the cylinders. Should have been visible with 13,000 miles. There were even a couple of tiny gouges in two of the cylinder walls. A couple of lifters were showing abnormal wear. The heads are being rebuilt due to wear. Either this engine was just a POS from the get go or maybe it was accidentally run without oil before I received the car. Who knows?
|
Last year I bought a car in a junk yard that had a 1994 Mustang GT 302 engine transplanted in it, it was in fairly good running condition, I mainly needed the block and a few other parts off the engine...Best we could tell, that engine had over 75,000 miles on it and when I tore it down,you could still see the cross hatch in all the cylinders and this engine did have a rough life up to that point.....
I don't have any idea what happened to your engine, but what you describe should not have happened in 13,000 miles and what other have been describing with their Roush engines with that or less mileage is not good...
David
__________________
DAVID GAGNARD
|
| Thread Tools |
|
|
| Display Modes |
Rate This Thread |
Hybrid Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 11:44 AM.
Links monetized by VigLink
|