bolt pattern 351W oilpan flange

[super]

Hello guys!

Does anybody has the correct dimensions of the bolt pattern for the 351W oilpan flange?

A sketch or drawing would help enormous!

Thank you so much.
Werner

[spdbrake]

http://i166.photobucket.com/albums/u...ps4d501528.jpg

[super]

Simply perfect, thanks!

That's the sketch I was looking for.

Sorry for asking back, but have you got also a similar drawing to the pattern of the 4 bolts located in the timing cover?

Club Cobra - super's Album: different things - Picture

[spdbrake]

I take it your building a pan.

You could use a rigid gasket like this to pull measurements from.
JEGS Performance Products 210298: One-Piece Oil Pan Gasket 1969-96 Ford 351W/5.8L | JEGS
or
Ford Performance M-6710-A351: Oil Pan Gasket 351W/5.8L Block | JEGS

[super]

No, I don't want to build a complete oil pan, I will only build reinforcement rails for the flange.

Something like this:
https://lmr.com/item/M6674302/frpp-o...995-m-6674-302

... but $85 plus shipment to germany seems to be much money for two simple steel rails.

Cheers,
Werner

[spdbrake]

LMR also sell these for $35

https://lmr.com/item/LRS-6755-RAIL/m...pan-rails-7995