Very Cool Parts: 351W Throttle Body System

Don · #1 (**permalink**) 06-29-2003, 07:34 AM

Does anyone have experience installing the Very Cool Parts individual throttle body system on a 351W using the MSD distributor and the MSD 6A ignition system ?

http://www.verycoolparts.com/

..............thanks

blubyu2 · #2 (**permalink**) 06-29-2003, 07:51 AM

Rich Gagliardi "GAGS" on FFcobra installed it over the winter you might want to check with him

Greg

DavidWard · #3 (**permalink**) 06-29-2003, 05:54 PM

I installed the system on a 302 using the MSD distributor and the MSD6AL ignition.

David

Don · #4 (**permalink**) 06-29-2003, 06:44 PM

David..........your thoughts on the ease of installing and tuning the system , any difficulties ?

................thanks

blubyu2 · #5 (**permalink**) 06-29-2003, 06:53 PM

here's some more info

http://www.ffcobra.com/ubb/ultimateb...c;f=1;t=021368

Im a jelious man

DavidWard · #6 (**permalink**) 06-30-2003, 06:45 PM

David..........your thoughts on the ease of installing and tuning the system , any difficulties ?

Installation is a single-afternoon job. It might take a little tinkering to get the linkage and accelerator exactly right.

Tuning isn't all that difficult, but it does take more time. It doesn't take long to get it so it will crank, idle, and run. But as I drive mine more and more, especially at different elevations, I keep finding spots where it is a tad lean or rich, so I keep making minute adjustments to try to get it perfect. By the way, I'm getting 21-22 mpg highway. Less around town.

Good luck,
David