CoolParts Stack Fuel Injection

GeorgiaSnake · #1 (**permalink**) 11-09-2003, 06:31 PM

Any small block guys running the Stack Fuel Injection from Cool Parts? I would like some feedback on performance and streetability.

Any other fuel injection systems that you guys run ?

Randy

Bart Carter · #2 (**permalink**) 11-10-2003, 12:50 PM

I have done a lot of research on FI for my engine. So here is my 2 cents:

There have been quite a few stacks sold by Cool Parts. I have never heard of one unhappy customer.

The tech service after the sale is also highly praised by owners.

Price is right for what you get.

The only problem with my car is heads I wound up using were not compatible. (Brodix 200's)

DavidWard · #3 (**permalink**) 11-10-2003, 04:01 PM

I'm running a set on a 302. Performance seems to be just slightly better than a well set up carb. When tuned correctly, streetability is super. It does take a little time to get them tuned properly.

Popeye · #4 (**permalink**) 11-16-2003, 02:38 PM

Randy,
I've been looking at the Stack System from Coo;l Parts and have had some good recommendations on the product.
David, your picture really looks great. Your reply has just about made up my mind for me.
Popeye

RedBarchetta · #5 (**permalink**) 11-16-2003, 07:14 PM

Can anyone provide Internet links and/or vendors? I'd be interested to learn more about this set-up and its cost relative to other FI set-ups. Thanks!

-Deano

Popeye · #6 (**permalink**) 11-16-2003, 08:38 PM

Drano,
www.verycoolparts.com is the address for the stack manifold system by Very Cool Parts.
Popeye

GeorgiaSnake · #7 (**permalink**) 11-17-2003, 03:55 AM

You can also check out http://www.twminduction.com/Home/Home-FR.html

RedBarchetta · #8 (**permalink**) 11-17-2003, 08:38 PM

Gentlemen, thanks!

-Deano (though "Drano" did make me chuckle)

Popeye · #9 (**permalink**) 11-18-2003, 07:04 AM

Deano,
Sorry for the mistype. Sometimes those fingers don't do what they're supposed to do.
Popeye