09-22-2009, 08:39 AM
|
|
CC Member
|
|
|
Join Date: Sep 2008
Cobra Make, Engine:
Posts: 52
|
|
Not Ranked
I'm assembling a 427 SBF stroker,and the heads came with the recommended 26120 BBC Beehive springs for hyd. roller cam use,from TEA.
My cam has a rated .600 lift on both Int. and Exh.
I got a bit nervous,when I checked the springs on the pressure checker, to see the bottom 3 coils start to stack near full lift! The actual measured install height is 1.890 with 157 psi. and 380 open psi.
I assume this is how the spring is designed to work? There is still plenty of coil clearance at the upper coils.
Last edited by Mus408; 09-22-2009 at 08:42 AM..
|
Threaded Mode
