new QA1s and still wobble - need help please

[dont]

You mentioned earlier that you have car #1385. If it was from 98 and had avo shocks is it # 385?. 1385 would ha e been made around 2003 and have bilstien shocks from the factory. My front end shake turns out to be the drive pins were slightly too long for the after market PSE wheels causing the wheel to not mate up to the hub.

[JW313]

Originally Posted by dont

You mentioned earlier that you have car #1385. If it was from 98 and had avo shocks is it # 385?. 1385 would ha e been made around 2003 and have bilstien shocks from the factory. My front end shake turns out to be the drive pins were slightly too long for the after market PSE wheels causing the wheel to not mate up to the hub.

sorry - get confused sometimes with the frame-number and the actual number of production.

My car ist #385 like you mentioned correctly - from 98 in guardsman blue.

Good point - could this have "warped" the wheel and what did you do to it. New pins or shave them off?

Thanks

Later

Jürgen

[dont]

I shaved the pins.