Carburetor or Fuel Injected Cobra?

[Semper Fi]

Originally Posted by Kenm4187

My Superformance is in the process of getting the motor and tranny put in right now. I will be autocrossing the car here in Sacramento and sometimes in Reno. I don't want to have to worry about changing the jets depending on where I run. I am going with the Mass-Flo system, it keeps the vintage look and has better drivability. I am hoping it should be ready in about a week.

Ken

Ken,
Thanks for the info....please post a picture. I am curious to what the Mass Flo looks like

[Calbullet]

Ken.. not to be off topic, but in a earlier post you were getting 17" wheels for your SPF. did you get them and what offsets and tire sizes did you go with. thinking about 17" myself. would love pic's if possible

Mel

[Kenm4187]

Originally Posted by Calbullet

Ken.. not to be off topic, but in a earlier post you were getting 17" wheels for your SPF. did you get them and what offsets and tire sizes did you go with. thinking about 17" myself. would love pic's if possible

Mel

Hi Mel,
I went with wheels from PS Engineering 17X9 front and 17X11 rear. The tires are the Hoosier A6 autocross tires 275 in front and 335 in the rear. I forgot to write down the offsets. Ordered them yesterday so I can't get you a picture, however they are on the ERA site http://www.erareplicas.com/427/wheels.htm. I will be going with some 3-piece wheels after I get the car and have a chance to see what I can use. I was in a hurry right now as the first race is in a few weeks.

Ken