Downshifting

Naumoff · #1 (**permalink**) 11-18-2007, 12:31 PM

On my Unique I have solid throttle linkage, so I was able to adjust the load pedal the proper location. You also have power brakes so the brake pedal will have more travel.

What type of thottle linkage do you have?

65cobra1 · #2 (**permalink**) 11-18-2007, 11:06 PM

Quote:

Originally Posted by Naumoff

What type of throttle linkage do you have?

Hi Tony,
I have solid linkage. I was thinking about adjusting that but to get it down to the level of the brake pedal, it seemed that I would lose part of my travel.
Ivan

Naumoff · #3 (**permalink**) 11-19-2007, 06:05 AM

Quote:

Originally Posted by 65cobra1

Hi Tony,
I have solid linkage. I was thinking about adjusting that but to get it down to the level of the brake pedal, it seemed that I would lose part of my travel.
Ivan

Mine worked out great but I am running a factory 2x4 set up and it doesn't require much pedal travel from idle to full throttle. The reversed carbs and the ratio of the linkage is very quick. It makes it a little strange to jump in a single four barrel car as I am use to using a lot of finesse on the throttle.