Superformance Oil Pressure Gauge

[Got the Bug]

Originally Posted by SPDNTKT

Blas/Panavia,

Thanks for taking the time to get back to me. I will let you (all) know how I make out. One more thing, based on the specifications of the engine, 20/50 oil, etc, what should the pressure be at idle? I am also going to contact Mike at Garrett Machine. Once again, thanks for the information.

Best regards,

Anthony

Anthony,

Here's a link to a thread with the PNs/supplier to build an AN oil pressure hose specifically for the SPF (if you decide to replace your plastic hose at some point).

Best way to access back of oil pressure gauge

[Great Asp]

Originally Posted by Got the Bug

Anthony,

Here's a link to a thread with the PNs/supplier to build an AN oil pressure hose specifically for the SPF (if you decide to replace your plastic hose at some point).

Best way to access back of oil pressure gauge

This is worth while. I had the funky platic line replaced when KCM installed the motor in 2715. The plastic line leaks at the fitting going into the motor on a lot of cars, as the fitting gets hot, and the engine torques up working the little brass ferrul into the plastic hose.

Don't ask why SPF does not give you the braided line from the factory.

If they did, you'd have no tinkering to do on your own.....

E

Bug, good post on the parts!