Driveshaft parking brake adjustment

sideoiler427 · #1 (**permalink**) 03-01-2022, 09:28 PM

Does anyone know how to adjust the parking brake on the driveshaft. The parking brake has not worked for awhile and i drove not realizing that i pulled the brake handle. It started to squeel when the brake is applied and the noise seem to be coming from the rear end. I was going to put the cobra on the rack and see if i could take off the pads and sand them and re-install.

sideoiler427 · #2 (**permalink**) 03-01-2022, 09:41 PM

I forgot to mention it is a superformance cobra 1836

NROTOXIN · #3 (**permalink**) 03-01-2022, 10:33 PM

In the future, you'd be better served posting in the Superformance forum on Superformance specific inquiries.

Mark IV · #4 (**permalink**) 03-02-2022, 06:35 AM

email me rick@timemachinesauto.com and I will forward the factory tech bulletin. If the brake has been driven with it on a distance the pads are likely toast. We have one in the shop now doing the update and new pads.

tortuga · #5 (**permalink**) 03-04-2022, 11:00 AM

Yes the pads in that thing are literally about the size of a healthy peanut. The adjustment procedure is in SCOF. Pretty Straightforward, you can get the pads from superformance, RT doesn't show that they are from some other vehicle...Maybe a vespa?

If you drive with the brake on for more than 20 feet they are probably toast.

Steve H
1764

Mark IV · #6 (**permalink**) 03-04-2022, 03:23 PM

Quote:

Originally Posted by tortuga

Yes the pads in that thing are literally about the size of a healthy peanut. The adjustment procedure is in SCOF. Pretty Straightforward, you can get the pads from superformance, RT doesn't show that they are from some other vehicle...Maybe a vespa?

If you drive with the brake on for more than 20 feet they are probably toast.

Steve H
1764

The brake pads are proprietary to Superformance