Wanted: Weber set up for 302

jpfletch1 · #1 (**permalink**) 02-28-2010, 08:00 PM

Looking for a weber set up for a new 302 build. Will be going into a GT 40. Thanks.

Rick Parker · #2 (**permalink**) 03-28-2010, 11:29 PM

There is one on EBAY now. 3/28/2010. Search "289 Cobra".

http://cgi.ebay.com/ebaymotors/Shelb...Q5fAccessories

blykins · #3 (**permalink**) 03-29-2010, 04:51 AM

Jim, who's doing your engine for you?

jpfletch1 · #4 (**permalink**) 03-29-2010, 10:27 AM

Probably Keith Craft. He has built my other motors for me.

blykins · #5 (**permalink**) 03-29-2010, 10:27 AM

Good choice.

Got my tooth fixed by the way...

JCoop · #6 (**permalink**) 03-29-2010, 12:20 PM

Quote:

Originally Posted by Rick Parker

There is one on EBAY now. 3/28/2010. Search "289 Cobra".

http://cgi.ebay.com/ebaymotors/Shelb...Q5fAccessories

Somehow, I seem to remember that this Cobra setup won't work in a GT40 install, Rick.

Anyway, the setup I installed came from Weber direct as a small block kit with hoses for under $3,000. Included a tuning kit: the vacuum meter with 5 sets of jet combinations.
http://www.webernorthamerica.com/web...merican-v8.htm

Rick Parker · #7 (**permalink**) 03-31-2010, 10:52 PM

Where is the link that connects the RH & LH pairs of carbs? If it's on the end you will experience twist in the shaft of the single carb that connects to the pair on the oppposite side.

JCoop · #8 (**permalink**) 04-10-2010, 10:04 AM

Quote:

Originally Posted by Rick Parker

Where is the link that connects the RH & LH pairs of carbs? If it's on the end you will experience twist in the shaft of the single carb that connects to the pair on the oppposite side.

Mmm, didn't think of that. It IS at the end, but doesn't seem to be a problem.