Question

digginfool · #1 (**permalink**) 02-09-2011, 08:11 PM

I just purchased a BDR Cobra and it's outfitted with 4 - 48 IDA Webers. The only filtration is the stock screens. I use Outerwears pre-filters on my ATVs to extend cleaning intervals. I can use them without rejetting so I was wondering, for extra protection, could I slip some Outerwears over the screens to provide extra protection against debris entering the engine without having to re-calibrate the Webers? Anybody try this before?

bobcowan · #2 (**permalink**) 02-10-2011, 06:31 AM

When you say, "Stock Screen", what exactly are you referring to? Do they look like this?

These are called Tea Strainers. They cost about 100hp, proven on the dyno. I would not put anything else over them. I got rid of mine.

digginfool · #3 (**permalink**) 02-10-2011, 01:55 PM

Here's what my set-up looks like.

http://clubcobra.com/forums/attachme...7&d=1297127593

Cashburn · #4 (**permalink**) 02-10-2011, 02:12 PM

That's not a stock screen, those units you have are not cheap either. They are supposed to work quite well. I understand the concern on an off road vehicle... but for the street you're already "covered" with those.

bobcowan · #5 (**permalink**) 02-10-2011, 03:42 PM

He's right. Everything I'v read about those screens is good news. I'm considering a set for track days.