Weber Dynaformance EFI problem. No injection with MSD Digital-6 Plus

[Pries]

Hello

I just finished to install of my new Dynaformance (Dynatek) Classic EFI system on my FE428.

I'm ready to start it up, but there is no of fuel from the injectors when I cranking the engine.? I run with 50psi of fuel pressure.

I run with MSD Digital-6 Plus CD Ignitions and built it into the wiring system as Installation manual says I can.

As I understand the green / yellow striped wire from the CFI to the white wire on the MSD?

Hope some of you can help me.

thank you

Regards
Jesper Pries-Jensen
Denmark

[*13*]

Is there fuel up to the motor?

[lovehamr]

Pries, you may want to drop a line to these guys. The fact that you have a "Dynaformance" says that your system is several years old and the maker has gone through several owners in that time as well. If I'm correct Eight Stack is the current manufacturer and is apparently very good in the customer service dept with new and old customers. I'd give them a shout.

Eight Stack Injection- home

[Pries]

Yes, I have 50psi on my engine all the time, but the system will not inject!

[Pries]

lovehamr, thanks for your advice, I will try to make contact with Eight Stack ..