Softening a heavy clutch pedal

[bstock]

I had the same problem. I have a wilwood master. I installed a sleeve kit to decrease the size of the bore, and moved the pivot point on the pedal arm slightly (shortened the stroke). Works great now.

[trularin]

I did what GAV has suggested.

Moved the pivot point. Note that the travel will be affected.

Hence, if you are moving 5 inches of peddle and you have a 5:1 ratio, you will only move 1 inch.

So - then you might want to look at the cylinder size for volume displacement.

If A = B then what you move at the peddle will move at the slave cylinder.

Just some things to think about.

As always, spelling is optional.

Tru