help me build a 460!

[fordracing65]

I want one.

[blykins]

The good thing is, unlike a Windsor or a production FE block, a factory 460 will handle a tremendous amount of power, so not having to buy an aftermarket block cuts down on the initial cost.

Pete, you going to switch your order now? I think we should do a 598-604 for you instead of that 445W.....

As Keith said, it depends on the car whether or not the intake will fit. A 460 block is the tallest of any (10.320" deck height vs. 10.170" for the FE, 9.500" for the 351, and 8.200" for the 302) so you're starting out with a disadvantage.

[mdross1]

The engine will fit but no room for an aircleaner to let this big pump breath to its capacity.For example my .030 over 460, 560hp needed a 3"x14" with Extreme top to get all the unrestricted air it inhales at 5500+rpms.A modified Harwood scoop looks good and does the trick for me.Good Luck