Do the static cling numbers stay on????

[FatBoy]

Originally Posted by Jamo

...at least on the brushed finish. I think they do on the polished ones ok.

Mine made it up to 12 mph or so.

Mine's polished now, so I'll have to try them again. I just put it down to the aluminium dissipating the static.

[1985 CCX]

67jet for the most part, yes...... Northeast is brutal.

I used Squier Design: As they are able to do custom anything.
http://squierdesign.com/

They were able to better match vintage sizes, most off the shelf companies use smaller diameter meatballs. As for the decals Enzo does a great job, Kress or even Squier Design.

Best of luck.....

[CoupedUp]

+1 on Squier Design! Had mine for three years and they still work great!

[FatBoy]

Originally Posted by FatBoy

Mine's polished now, so I'll have to try them again. I just put it down to the aluminium dissipating the static.

I've tried them again on the polished aluminium and they now seem to stick on fine.
I took the Cobra to the office yesterday, which is around 40 miles in total and they were still there when I got back home.

[Out There]

FYI, after an extended period, they can damage the paint. On a Unique that I purchased used, static cling #s had been on for at least several years there was paint damage. The paint was lightly crazed underneath the #s only.
2000 grit and a light buff took most of it out, but I could always see it on the trunk and hood. Base coat clear coat paint.

[DocDirk]

I've looked around at many a decal site, and Finishline but not found the nifty looking team fender decals which I think look really great. Anyone know of a source for those? Originality has not been my top priority for my build - is the use of decals intended to emphasize a cobra's originality?

Thanks!

Dirk