Main Menu
|
Nevada Classics
|
Advertise at CC
|
S |
M |
T |
W |
T |
F |
S |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
|
|
|
|
CC Advertisers
|
|
06-19-2010, 05:45 PM
|
CC Member
|
|
|
Join Date: Jan 2010
Location: ASHEVILLE,
NC
Cobra Make, Engine: Factory Five, 427W
Posts: 51
|
|
Not Ranked
velcro coming lose from dash
The guy I got my cobra from used velcro to hold dash at the top and around rail, with the summer heat is has come lose, what has everyone used????
__________________
ff#5501 427w,TKO 600,P/S,Hydroboost,4wheel cobra disc/C Narrowed Mach1 rear, Moser axels,3Link,I Squared
|
06-19-2010, 05:55 PM
|
|
CC Member
|
|
|
Join Date: Dec 2000
Location: Central,
TX
Cobra Make, Engine: Midstates Cobra, RFGT40
Posts: 2,038
|
|
Not Ranked
Ratdog,
Nothing wrong with using Velcro. The only
problem is that the Velcro adhesive needs to be replaced with a two part 5 minute epoxy. It will
never come off and I don't care how hot it gets.
If you ever replace the Velcro with a different method then you will have to grind it off.
I use Velcro to hold my fuse panel. The stuff is incredible. I used the industrial size Velcro.
Hersh
__________________
Crookedoaktexas.COM
|
06-19-2010, 06:08 PM
|
CC Member
|
|
|
Join Date: Jan 2010
Location: ASHEVILLE,
NC
Cobra Make, Engine: Factory Five, 427W
Posts: 51
|
|
Not Ranked
would screws around the top work and what size and how far apart should I put them?
__________________
ff#5501 427w,TKO 600,P/S,Hydroboost,4wheel cobra disc/C Narrowed Mach1 rear, Moser axels,3Link,I Squared
|
06-19-2010, 06:33 PM
|
|
CC Member
|
|
|
Join Date: Dec 2000
Location: Central,
TX
Cobra Make, Engine: Midstates Cobra, RFGT40
Posts: 2,038
|
|
Not Ranked
Sure, That will work. If you post a photo of what you got it would help.
You might want to go to the FFR site and download their build manual. I'm sure it has details on how they recommend the dash should be afixed.
Hersh
__________________
Crookedoaktexas.COM
|
06-19-2010, 07:20 PM
|
CC Member
|
|
|
Join Date: Sep 2008
Location: Chesterfield,
VA
Cobra Make, Engine: FFR Mk 3.1, Carbed 302
Posts: 51
|
|
Not Ranked
Take a look here. It's the FFR dash mounting instructions from Breeze Automotive.
__________________
CoryB
|
06-19-2010, 08:43 PM
|
|
Super Moderator
|
|
|
Join Date: May 2001
Location: Fresno,
CA
Cobra Make, Engine: KMP 184/482ci Shelby
Posts: 14,441
|
|
Not Ranked
For whatever you want to use it for, Radio Shack carries a high strength/high heat Velco-type product. Both sides are the same, and actually snap when they interlock.
Should also work great for cupholders, air conditioning units, rollbar padding...
__________________
Jamo
|
06-20-2010, 05:21 AM
|
CC Member
|
|
|
Join Date: Jan 2010
Location: ASHEVILLE,
NC
Cobra Make, Engine: Factory Five, 427W
Posts: 51
|
|
Not Ranked
I used a two part epoxy ,the 5 min stuff. I will see if that works today. Another hot one here in NC
__________________
ff#5501 427w,TKO 600,P/S,Hydroboost,4wheel cobra disc/C Narrowed Mach1 rear, Moser axels,3Link,I Squared
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 10:35 PM.
Links monetized by VigLink
|