10-17-2010, 10:16 PM
|
 |
CC Member
|
|
|
Join Date: May 2001
Location: California,
Ca
Cobra Make, Engine: NAF 289 Slabside Early Comp Car with 289 Webers and all the goodies. Cancelling the efforts of several Priuses
Posts: 6,592
|
|
Not Ranked
Max:
Yes # 84313, its the same as the red one used in their current production for the Small Diameter Billet Distributors. Distributor numbers are displayed in this link as well as Photo of the Cap. I use this one myself. If you have an early production Small Diameter Billet Distributor, they used two aluminum hold down clamps, they are not used with the new caps. Caps fit early and late production distributors. NOTE: The distributor model numbers shown are not complete. Go to the distributor section and check caps in "Accesories". The 8431 is the red cap (w/o rotor). THen Scroll down in "Accessories" it shows the same incomplete numbers.
Black:
http://www.msdignition.com/Products/...545,_8546.aspx
Red:
http://www.msdignition.com/Products/...545,_8546.aspx
__________________
Rick
As you slide down the Banister of Life, may the splinters never be pointing the wrong way 
Last edited by Rick Parker; 10-17-2010 at 10:33 PM..
|
1Likes
Threaded Mode
