Need advice: brakes on CMC/StreetBeasts

Double Venom · #1 (**permalink**) 12-02-2010, 05:30 AM

That HAS TO BE THE FINEST STREET BEAST, FIBREFAB, Innovative Street Machine, CMC COBRA I have ever seen! Beautiful!

Someone has put a ton of work in this one, and well shows it!

DV

holt8137 · #2 (**permalink**) 12-02-2010, 08:45 AM

Quote:

Originally Posted by Double Venom

That HAS TO BE THE FINESSED STREET BEAST, FIBREFAB, Innovative Street Machine, CMC COBRA I have ever seen! Beautiful!

Someone has put a ton of work in this one, and well shows it!

DV

Thanks!! I agree that whomever built the car did a superb job all around. The paint is amazingly good, and the engine... well I can just stare at that all day with a big smile on my face.

Quote:

Holt
I have a part list with picture of the plate you need. I can't attached it here??

PM'd

DonB · #3 (**permalink**) 01-01-2011, 04:35 PM

Holt, I'm still in the process of assembling my CMC , Mine has a 1/4" plate on the engine side and on the footwell side there is a 1/4" pc of angle iron that bolts thru the frame on the bottom and out thru the plate that the master cylinder mounts to, then the pedal assembly bolts to the hoop that the dash mounts to and the bolts for the master cylinder go thru the 1/4" plate and into the pedal assy. housing. Overall mine looks pretty stout. Don