Spats I Made - What Do You Think?

[STL Mark]

Did you use a standard sewing machine or an industrial machine?
Thanks

[snowgoer]

Originally Posted by STL Mark

Did you use a standard sewing machine or an industrial machine?
Thanks

Used industrial machine that has been used for boat canvas mostly.

[1985 CCX]

WELL DONE!

[STL Mark]

Have you tested them at highway speeds?
Do they flop or move?
You've inspired me to add these to my car.
Nice Job!

[snowgoer]

Originally Posted by STL Mark

Have you tested them at highway speeds?
Do they flop or move?
You've inspired me to add these to my car.
Nice Job!

I tested them at 65 plus mph and they did not flap around at all. I am actually shocked at how well they did turn out. I was trying this just as a last resort because I could not find anyone that made them.

[rodneym]

snowgear,

Did you at least keep the BDR pattern for yourself? The first one's the toughest.
Having patterns for BDR, SPF and FFR would probably maximize your 'investment of time/business' ratio.

[snowgoer]

Originally Posted by rodneym

snowgear,

Did you at least keep the BDR pattern for yourself? The first one's the toughest.
Having patterns for BDR, SPF and FFR would probably maximize your 'investment of time/business' ratio.

Yes, I have a pattern and have spent the last few hours making some more Spats for a possible opportunity. I will see how they do and then look at other manufactures if there is enough interest. The only problem in going to other manufactures is I would need a Cobra from those manufacturers close by so I can make sure I get it right. I want to make sure the quality and fit are perfect if I am going to do them.