11-06-2011, 11:24 PM
|
 |
CC Member
|
|
|
Join Date: Sep 2009
Location: Hideaway, Texas,
TX
Cobra Make, Engine: Backdraft #318, 418 CI, 532 RWHP, Mass Flow Injected, TKO600-Road Race, BMW M3 Suspension, Race Springs (Wouldn't do it again, rough on the street).
Posts: 240
|
|
Not Ranked
Cam is out and to ID it
Finally got the cam out of my little 418 and need help with identification. Supposed to be a Comp Cam and it is a hydraulic roller. I can't find the numbers on CC's consumer site. Can someone decipher the numbers and possible manufacturer.
Easier to read off of the camshaft. The numbers are:
3318F / 3319F HR112.0
CC (or LL at the center right)
251668
G2009-05 (that could be 0.5, but prob. not)
Looks like it was installed advanced 4 degrees on the crank sprocket which I suppose is +2 at the cam. Was a very strong cam.
I'll report more on what I'm finding on the lobes and rollers as I go, but I'm going to replace the cam and whatever else I need to anyway in an abundance of caution. I need to get something on order and hoping Brent is one of the responders. 
__________________
Wayne Rogers in Hideaway, Texas
|
Threaded Mode
