Finally got my Billboards on

[ViperGuy]

Originally Posted by FUNFER2

What brand was on it before ?
Let us know the drive & ride difference between the radial vs billboard bias.

They were BFG's. I'm thinking they were the originals from 1999. I'm waiting on new safety wire to arrive in the mail before I can drive the car. I'll give you my impressions then!

[FUNFER2]

Sounds great. (you could just use duct tape)

[Got the Bug]

Originally Posted by ViperGuy

They were BFG's. I'm thinking they were the originals from 1999. I'm waiting on new safety wire to arrive in the mail before I can drive the car. I'll give you my impressions then!

Go for a drive. The safety wire isn't going to prevent a wheel from coming off, it's just going to let you know if the spinner has moved.

[marco454v8]

Originally Posted by Got the Bug

Go for a drive. The safety wire isn't going to prevent a wheel from coming off, it's just going to let you know if the spinner has moved.

Got to agree with Doug- I nearly lost a left rear, safety wire did nothing! It jumped off the pins, then re-seated on the ends of the pins! I had previously painted the wheels, so they were freshley re-seated (obviously not properly)
Mark