08-21-2014, 08:32 AM
|
|
CC Member
|
|
|
Join Date: Sep 2009
Location: Hideaway, Texas,
TX
Cobra Make, Engine: Backdraft #318, 418 CI, 532 RWHP, Mass Flow Injected, TKO600-Road Race, BMW M3 Suspension, Race Springs (Wouldn't do it again, rough on the street).
Posts: 240
|
|
Not Ranked
I Need a Chassis....
I'm trying to take a shortcut here, so bear with me and any help would be appreciated.
I need a rolling Cobra chassis for an off the wall project. I don't want to build one or fab one this time, so looking for something "in the ballpark" as a starting point for this project. Twin tube type would be best as the project body is more suited for that. Solid or IRS if fine, less cluttered the front the better. If it's a roller, the more complete the better, there will be a lot less work involved, even having to move things around. (No body/fiberglass needed.)
Motor package isn't important as I have an Aurora Indy Car motor that's going in it and it's much smaller than anything normally put in a Cobra.
Strange request I know, but this just may work out pretty slick and save an incredible amount of fabrication time and work.
I know this is not a "Cobra" subject really, but the knowledge here is vast and deep, so I'm hoping to tap it and see if anyone knows of a dead project or situation that just might work that we can get our hands on. And I know there will be other questions/concerns, but I'm just keeping it simple for now.
Really appreciate any help.
__________________
Wayne Rogers in Hideaway, Texas
|