Chassis rigidity

[Dimis]

Originally Posted by Tim7139

While I've seen a lot of information on the subject, has there been any hard test data on the rigidity/flex of the more popular platforms such as SPF, ERA, Contemporary, FF, BD ?
Anybody care to grid them less to more, etc. etc.

Originally Posted by xlr8tr

what about the aussie guys where I think they have to show chassis rigidity data before they can register the vehicle?

True... Our compliance process requires this, its mandated into the hoops of fire that need to be jumped through.

However, despite this, I doubt the information is held in one place.

Further I doubt the kits requested above are circulating in Aus without modification. I'm not aware of any ERAs or BDRs (for example) in standard guise that are getting around...

It would be interesting though... and I'd hazard a guess and say I wouldn't expect any of the US made kits to come close to the Aussie kits on this level.

[AL427SBF]

Originally Posted by Dimis

... and I'd hazard a guess and say I wouldn't expect any of the US made kits to come close to the Aussie kits on this level.

I expect JBL would cruise through aussie regs in flying colors, in excess of 4800 lbs per degree torsional stiffness done on a chassis weighing 418 lbs
.

[Dimis]

Originally Posted by AL427SBF

I expect JBL would cruise through aussie regs in flying colors, in excess of 4800 lbs per degree torsional stiffness done on a chassis weighing 418 lbs
.

True. JBL is impressive, but when you consider our minimum is 4000nm per degree, the JBL really ain't the bench mark now... Wouldn't you agree?

Particularly when you consider some ICV kits here are quoted in at reaching over 30,000nm per degree. Though I can't claim to know their weight for the sake of comparison.

[vector1]

Originally Posted by Dimis

True. JBL is impressive, but when you consider our minimum is 4000nm per degree, the JBL really ain't the bench mark now... Wouldn't you agree?

Particularly when you consider some ICV kits here are quoted in at reaching over 30,000nm per degree. Though I can't claim to know their weight for the sake of comparison.

I think you have to consider the frequency also. Don't understand it all but the JBL was measured at 24 Hz minimum, I've seen different frequencies listed for whatever the test produce considerable difference in numbers. Maybe Richard will chime in.

[strictlypersonl]

Originally Posted by Dimis

True. JBL is impressive, but when you consider our minimum is 4000nm per degree, the JBL really ain't the bench mark now... Wouldn't you agree?

Particularly when you consider some ICV kits here are quoted in at reaching over 30,000nm per degree. Though I can't claim to know their weight for the sake of comparison.

The problem with a Cobra replica that is a close visual copy of the original is that it it totally restricted by what will fit "under the skin". We are very limited by the space necessary for the driver and engine, in what is really a pretty tiny package. The JBL skirts this a little by being a little creative with the original dimensions. i.e. wider and longer.
In addition, this is an open car. Cars with roofs have a big structural advantage.