10-19-2015, 05:22 PM
|
 |
CC Member
|
|
|
Join Date: Jan 2013
Cobra Make, Engine: SPF 2607 Roush 427IR 8-stack EFI
Posts: 69
|
|
Not Ranked
Hello guys, thanks for the reply. I think is the ECM. I got this message from Roush
Quote:
|
If you can access one of the injector connectors, please make the following check if you have not already done so: with the ignition key in the run position, use a test light and check both pins of the injector connector. One should be a constant 12 volts and the other should show no voltage. The 12 volts is a reference signal from the computer. If both pins do not have power, we probably need to service the ECM.
|
Just did and no power. So today is not a lucky day for me. :-(
I will have to send the ECM and wait for the bill. Mercy Roush, Thanks
__________________
You drive Coca-Cola "Original", I drive Pepsi... 
|
2Likes
Hybrid Mode
