Real vintage turkey pan

[ypsimatt22]

OK well here are the direct links to the photos I took. Lets see if this works.

https://image.ibb.co/iFgeKf/1.jpg

https://image.ibb.co/gSOgX0/2.jpg

https://image.ibb.co/nceDC0/3.jpg

[ypsimatt22]

Any insight is appreciated. I know its old but im sure people have been repoping cobra parts forever so im not sure if it is real or an older copy.

[t walgamuth]

Originally Posted by ypsimatt22

OK well here are the direct links to the photos I took. Lets see if this works.

https://image.ibb.co/iFgeKf/1.jpg

https://image.ibb.co/gSOgX0/2.jpg

https://image.ibb.co/nceDC0/3.jpg

I have no knowledge of such things but they do have an age correct looking patina to them.

[ypsimatt22]

Yea any carb box that was on a competition car is going to have the four holes in the front and rear because jet changes on the Holley would be a huge pain in the butt if you cant get the fuel bowls off. Im not even sure what the repop boxes typically look like but the one repop I found online doesnt have them. Theres a slight rake to the box also it is shorter in the front and there are tool marks under the lip around the top of it like they used a pneumatic flanger to make it the lip.

[ypsimatt22]

Other than the fact that it is at least from the 70s, the thing that made me think it could be real is the multiple competition preped 427s that were in the shop it came from. The machinist had a lot of high end engines that your average machine shop will never see because you have to have a great rep to get business from guys with tunnel port and high riser 427s and 426 hemi builds. He had a lot of serious hardware in his shop so the cobra carb box really wasnt out of place.