Trying to Find a Proper Air Filter (Turkey Pan)

[frankym]

I've been searching for a reference here. I've also looked on K&N's site and there is no replacement for my existing K&N Air Filter Model A082A8, This air filter measures approximately 8.25' OD and 2.00" Height.

I've tried finding suitable dimensions looking on K&N's site (search by dimension) and i've also looked at Stelling and Helling, Wix, etc., nothing.

[patrickt]

This was my original thread on the K&N Filter that I put on mine, but the site may have killed it over the years with all its problems because you can find it but you can't pull it up.
Turkey Pan on Side Oiler
If you could get to it you would see this, it is a K&N 66-0901 X-Stream. It works wonderfully well. Just remember that if you have a vacuum secondary carb you will have to adjust the secondaries or they won't open after putting in the high flow filter.

[DanEC]

This one is supposed to fit. I think it’s what I have. E-2570

https://www.summitracing.com/parts/knn-e-2570

Edit: Opps, just noted it says not available. A few places say available by special order but looks to be out of production for the most part.

[frankym]

Thanks! I put an order in for the e-2570. They appear to have one available at https://hhtruckaccessories.com/

[DanEC]

I think K&E as well as Fram run certain filters intermittently. The big 426 Hemi air filters from Fram for 66-68 Hemi cars have gone out of availability several times over the years but then they will make a run of them and people stock them up.

[Lulworth]

I used the same 66-0901 X-Stream setup but used a K&N E-2720 for a little more filter area. Check your clearance height!

[Cashburn]

We switched and became a dealer for Aeroflow. K&N kept raising prices and the quality was dropping. Then then started discontinuing part numbers.

Been happy with Aeroflow performance, price, and appearance.