02-05-2003, 12:47 PM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Jun 1999
Location: Dublin,
CA
Cobra Make, Engine: TBD
Posts: 1,298
|
|
Not Ranked
530 HP 516 lb. ft. of torque
Hello All,
Don Scott of Minnesota classics has delivered my 410 cu. in stroker to DV to install in the DVSF II FFR Daytona Coupe. The HP and torque figures 530 HP 516 lb. ft. of torque come off of the Dyno sheets. The more impressive figures come from the 562 lb. ft of torque at 4400 RPM with 471 HP this is with the eight down stacks and TEC3 engine management system.
Don ran the engine first with a 750 carburator and manifold and the comparable figures are 548 lb. ft. of Toque and 459 HP @4400 and 495 lb. ft. of torque and 509 HP @ 5400 RPM. BTW Don delivers his engines with a 12 month 12,000 mile warranty and has proven not only to be a great engine builder but, a good solid ethical businsss man.
I have loaded two pictures of the engine into my Gallery, not just impressive performance but, a beautiful piece of work.
Tony R.
Last edited by Tony Ripepi; 02-05-2003 at 02:47 PM..
|
Threaded Mode
