Zoops.com Alum. Sealer

CSX 4039 · #1 (**permalink**) 04-29-2003, 10:00 AM

Any body know if this $129 product works?

http://www.zoops.com/zoopseal.asp

FUNFER2 · #2 (**permalink**) 04-29-2003, 10:20 AM

Hello Brett, I asked this question a while back with no responce. I've seen it used on some t.v shows with great remarks. I think I'll try it when I get most or all of my alum. parts needed so I can do them all at the same time. Car shows are starting this weekend, I'll ask around.
Kev

CSX 4039 · #3 (**permalink**) 04-29-2003, 10:31 AM

at $129 for 60 sq. ft. coverage, it would cost $500+ for an aluminum body!!!

Chaplin · #4 (**permalink**) 04-29-2003, 10:36 AM

Brett-
Do a search for Zoop. There was some discussion about it some time ago and I think the consensus was that it did work. Ron (Computerworks) posted a link to one of the FFR forums where someone did a whole write up on Zoop seal.

I am actually going to order some of it shortly.

Mike

FUNFER2 · #5 (**permalink**) 04-29-2003, 08:09 PM

Hey Brett, are you saying that if I covered my 2000 sq. ft of alum. house siding that $258000 would be too much ? hehe!
Kev