07-29-2003, 05:28 AM
|
 |
Member of the north
|
|
|
Join Date: May 2003
Cobra Make, Engine: A Cobra
Posts: 11,207
|
|
Not Ranked
YES! It is bronze and the entier drive train usually vibrates or worst if it is not installed.
If you have a big bone toploader, you will need to find the truck adaptor pilot bearing. OR, you can call David Kee and ask for a special input shaft that has a longer snoot.
If you have an 1 1/16 input shaft, you just need to find a pilot bearing.
Tap it in with a plastic hammer, dial it to make sure it is round in the butt of the crank and then dab a little grease in it.
Hope this helps.
__________________
I'm a writer, feed the artist and buy a book.
|
Threaded Mode
