|
This is far better than J. Jackson's nipplegate:3DSMILE::p
Ken |
Now I know why I got wheels that are held on with lug nuts.
Wayne |
Guys, I'm taking a break until Saturday. The wheel will be detached Saturday, I promise. I hope.
|
:( :confused: :rolleyes:
Need any help this weekend? I have my own tool belt and tools:D We have baseball this weekend. Eric will only pitch one day so I'll have the other one free. Randy You have a concrete vibrator? It might help :cool: |
Well if I had spent the last few days beating on it, I'd need to take a break too.
:D |
Quote:
|
I was gonna sell the car for 25k, but Big Ern said he give me 35k for it. What should I do?:p
Dirty Jimmy |
As the spinner Turns **) :JEKYLHYDE
Sorry I couldn't resist.:LOL: |
I can Fed Ex my new plasma cutter to you:3DSMILE:
Scott S |
Is it off yet?
|
Jim,
Just unbolt the entire wheel, suspension, and assembly and send it to me. TC had the right idea. I will turn it over to one of my guys and let you know what its problem was. Better than ruining a hub, wheel, fender, etc. (all of the aforementioned parts are very expensive.) If we ruin it, it won't cost you a nickel. David:) :) :) |
There ya go...Davey and da boys to da rescue.;)
OK...intermission. Everyone go to the bathroom, refill your drinks and get ready for the next thread: "Hey David, how do you get this $$%%^&&**(&%^#@# suspension off?" :3DSMILE: |
Quote:
|
SF,
There you have an answer. Take the whole rear end out and send it to David and his guys. Saturday is approaching and I can't wait to see the next step of this saga. This is more fun than reading about Turk and his ever changing car parade. Allen, I think a better title would be As The Spinner Didn't Turn. :LOL: :LOL: Ron :JEKYLHYDE :LOL: %/ |
Don't send it to David, send it to me!
I won't fix your problem, but I will make a real neat coffee table out of the wheel and suspension! |
Can you do that?
If I knew you could change a tire that way, I wouldn't be carrying the scissor jack in the trunk in case I had a flat or something. What is next? To change the timing on our cars, you hold the distributor in place while you rotate the engine? TURK |
I like the plasma cutter idea:)
|
Nobody's asked yet why he's taking the blasted thing off.
Not that I'm on CC at work, but everyone at work just looked at me funny after I read Turk's new timing adjustment technique and I started cracking up, followed by a good snort of coffee coming out all over my desk. But Turk, I think you're oversimplifying this new timing procedure. I'd think the proper thing to do would be to remove the timing cover, remove the timing chain, pull the cam, send it back to CompCams (or wherever), have them take it out of the package, note how it is aligned in their hand, rotate it a couple degrees, take a picture, put it back in the package, and send it back. And I'll be damned if next time I run out of gas, I just drive up to the pump and fill my car. I'm going to send my carb in to Barry Grant and have them refill it. Gawd, are we on page 6 now for this one, really? |
Cant wait
I don't have my Cobra yet but, as stupid as this may sound, I can't wait to have some of these experiences.
Looking forward to being an active part of the nuthouse. |
Oh hell, this tread has made my day.
|
| All times are GMT -7. The time now is 01:23 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: