| trularin |
04-04-2004 07:11 AM |
Jim! Jim! Quick, try the doors before you send the rear end. LOL
|
| Ron61 |
04-04-2004 07:22 AM |
Jim,
Now that the wheel is off, which part are you going to attack next? This is just to good of a threat to let end here. There must be parts left that you haven't tried yet. :LOL: :LOL:
Ron :3DSMILE: :D **)
|
| southernfriedcj |
04-04-2004 08:03 AM |
Turk, try a sledge hammer. Now you guys leave me alone, I've got some sanding to do(while I await the modor and tranny that is enroute to my very location).:D
|
| wilf leek |
04-04-2004 01:44 PM |
I can't believe it.
I truly believed that this would go on 'till at least Easter.
SFCJ - you have ruined my week. To think that brute force achieved what science could not.
Next time - piece of 1" gas pipe over the "ear" of the spinner and back the car up. Surprised no-one else suggested this - worked for me on a double decker bus!
|
| southernfriedcj |
04-04-2004 03:30 PM |
Wilf, I tried that. It just raised the car off the ground!;)
|
| wilf leek |
04-04-2004 03:55 PM |
It's the second time around that gets it.
|
| Doug I |
04-14-2004 10:27 AM |
Quote:
Originally posted by wilf leek
blah blah blah ......
Next time - piece of 1" gas pipe over the "ear" of the spinner and back the car up. Surprised no-one else suggested this - worked for me on a double decker bus!
|
You had your car on a bus :confused: What was the fare ?
ahhhh the English ....... :3DSMILE: |
| Ron61 |
04-14-2004 10:55 AM |
Doug,
Wilf probably had the car on the upper deck. That way when it hit the ground he had the full weight of the car plus the speed of the fall to twist the pipe. :D
Ron :LOL:
|
| tgitchel |
12-15-2010 10:12 AM |
Quote:
Originally Posted by Hydramada
(Post 458274)
This is going to sound silly but it worked for me.
Take the center cap off the spinner, load about 4 ice cubes into the hole and hold them there as they melt. Once the inside of the hub is good and cold, give the spinner a good smack with your lead hammer.
Brian
|
Yes this did sound a bit strange, but after 45 min. of pounding away with a lead hammer and shattering a 2X4 with a 10lb sledge, I tried this and a few moderate taps with the lead hammer took it right off! Thanks for the suggestion!! |
| All times are GMT -7. The time now is 04:06 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
